Sodium dioctyl sulfosuccinate.

1. Easily soluble in water, the solution is milky white, not resistant to strong acids, strong bases, heavy metal salts and reducing agents. It penetrates quickly and uniformly, and has good wetting, penetrating, emulsifying and foaming properties. The penetrating effect is good when the temperature is below 40°C, and it is easier to hydrolyze when encountering alkali at high temperature. It is suitable to treat the fabric with a penetrating agent before heating up at a temperature below 40°C. The penetrant T is not resistant to strong alkalis, so it cannot be directly added to the concentrated lye. The lye should be diluted before adding the penetrating agent T.

2. This product is a high-efficiency penetrant. It is used to treat cotton, linen, viscose and their blended products. The treated fabric is directly bleached or dyed without scouring, which can improve the dyeing defects caused by dead cotton. The fabric feels softer and plump. During the scouring and bleaching of the green body, the slurry is decontaminated first to ensure the penetration effect.

3. If you find too much foam when using penetrant T, you can add a small amount of defoamer, GP or octanol, tributyl phosphate and other defoamers.

4. Used for dyeing raw cotton; used for pesticide wettable powder.